Home Decor

Four essential laws of gib fixing

Google+ Pinterest LinkedIn Tumblr

Gib stopping can give you a good finish. You will need to have efficient gib fixers to achieve this. These are the basic rules for a better long-lasting finish. These simple rules will help you find the best gib fixers in Auckland. You can ask questions about their process before hiring them and spot any errors. These rules will help you understand the process of renovating your home. You will know what areas need attention. This guide explains the rules for fixers.

The rules of gib-stopping will help you to understand the process:

Use gib to stop light from falling across

Gib plasterboards must be secured so that light does not fall on the joints. It is common to fix the sheets so that they run in the same direction as the light source. The gib is usually fixed horizontally to the walls. However, light can also be run vertically, as with skylights.

Minimises cut joins or butt usage

When two non-tapering ends meet, butt joints are formed. The professionals recommend that you order a gib that will fit into every ceiling or wall. Framing members have been provided with written instructions on how to lay out the sheets. If the sheet structure is confusing, you can call the plasterboard dealer to get a layout that matches the sheet layout. The gib should be placed above windows and doors so that the butt joints can be ignored. Ceilings should be lowered so they don’t become visible.

Avoid movement-prone areas

It is important to ensure that joins aren’t located near areas that are susceptible to movement. This is because the areas that are most prone to movement agents have been abandoned quickly. These joints should not be installed by gib fixers. Common places that movement can occur include junctions between rooms, corridors, stairwells, and floors.

Black blocking can be used to create ceiling joints

This is a method of strengthening the joints of plasterboards in order to reduce cracking and stabilize the joints between sheets. According to the NZ plasterboard standard, ceilings must be black blocked if more than three joins are present. Black blocking must be used on the ceiling and stairwells. It is because timber shrinkage and expansion reduces the chance of peaking. Some GIB Fixers in Auckland choose to use contact adhesives rather than standard-setting compounds.

Author

Write A Comment